MOBILE EQUIPMENT

The produced machines are incorporated into mobile and semimobile equipment. Mobile equipment is completely autonomous and can be transported between the locations and thus solve an immediate raw material processing need in those locations. The semimobile equipment is a technological unit which can be transported in the area of the quarry and thus reduce costs for material transportation etc.


MOBILE CRUSHING UNITS MCU


The MCU mobile crushing units are used for aggregate crushing. MCU complies with all the significant requirements for this category of crushing equipment.

The hopper of MCU can be fed by material for crushing directly from the excavator or a loader with the width of the shovel up to 2.5m.

The crushing unit is transported on a dual-axle undercarriage on the roads. The crushing unit can be also equipped by a crawler undercarriage for its easier movement in the location.

Parameters of MCU Mobile Crushing Units

The parameters must be dealt with individually depending on the relevant conditions.


CONTAINER SIZE CRUSHING UNITS CCU


CCU container size crushing units are used mainly for recycling of building waste.

The hopper of CCU can be fed by material for crushing directly from the truck or a loader with the width of the shovel up to 3000mm. After partial pre-screening and/or separation of clay on the vibration feeder, the material is crushed by a jaw or impact crusher.

The discharge belts can be equipped by a magnetic separator. They are folded by hydraulic system for transportation. After the hopper is folded, the whole equipment does not exceed the clearance profile. The container can be transported by a vehicle with hydraulic equipment according to DIN 30722.

Parameters of CCU Container size units

The parameters must be dealt with individually depending on the relevant conditions.


SEMIMOBILE CRUSHING UNITS SCU


SCU Semimobile crushing units are used for aggregate crushing or recycling of building waste and comply with all important requirements for this category of crushing equipment.

The hopper of SCU can be fed by material for crushing directly from the truck or a loader with the width of the shovel up to 3000mm. After partial pre-screening and/or separation of clay on the vibration feeder, the material is crushed by a jaw or impact crusher.

The discharge belts can be equipped by a magnetic separator. When the hopper is folded and the equipment is partially dismantled, the whole equipment does not exceed the clearance profile.

Parameters of SCU Semimobile crushing units

The parameters must be dealt with individually depending on the relevant conditions.