FEEDERS

The even operation of crushers and screens is ensured by vibration feeders and belt feeders.


VIBRATION FEEDERS VPL


The VPL feeders are used for feeding of non-sticking materials as e.g. natural aggregate, building waste etc. into the crushers, grinding plants or screening equipment, conveying transportation etc.

The feeder is driven by two attached vibrating motors. To change the feeding amount, adjust the unbalanced weights of the vibrating motors or change the frequency by the frequency converter.

VPL Vibration feeders = many advantages:

  • Minimum operation costs, which results from the balanced machine design, utilization of many years' of vibration feeder operation experience and unification of parts.
  • Easy exchange of the armouring.
  • High quality = high effectivity + highly economic operation.

Parameters of VPL Feeders

The parameters must be dealt with individually depending on the relevant conditions.


VIBRATION FEEDERS VPR AND VPLR


The VPR feeders are used for discharging, pre-screening and feeding of an even volume of non-sticking, bulk materials from a hopper or a silo into the crushers, grinding plants or screening equipment, conveying transportation etc.

The pre-screening of the material takes place on a installed screening grate with the slot size up to 150mm.

The feeder is driven by two attached vibrating motors. To change the feeding amount, adjust the unbalanced weights of the vibrating motors or change the frequency by the frequency converter.

VPR and VPLR Vibration feeder = many advantages:

  • Resistance against clogging and sticking of the screened material on the screening grate.
  • The cascade design of the grate deck makes the screening of finer fractions more effective.
  • Minimum operation costs, which results from the balanced machine design, utilization of many years' of vibration feeder operation experience and unification of parts.
  • Easy exchange of the armouring.
  • High quality = high effectivity + highly economic operation.

Parameters of VPR and VPLR Feeders

The parameters must be dealt with individually depending on the relevant conditions.


VIBRATION FEEDERS VPT


The VPT feeders are used for discharging and feeding of an even volume of non-sticking, bulk materials from a hopper or a silo into the crushers, grinding plants or screening equipment, conveying transportation etc.

The feeder is driven by two vibrating motors. To change the feeding amount, adjust the unbalanced weights of the vibrating motors or change the frequency by the frequency converter.

VPT Vibration feeder = many advantages:

  • Minimum operation costs, which results from the balanced machine design, utilization of many years' of vibration feeder operation experience and unification of parts.
  • Easy exchange of the armouring
  • High quality = high effectivity + highly economic operation.

Parameters of VPT Feeders

The parameters must be dealt with individually depending on the relevant conditions.


BELT FEEDERS PPV


The PPV belt feeders are used for discharging and feeding of an even volume of non-sticking, bulk materials from a hopper or a silo into the screening equipment, conveying transportation etc.

The conveying belt of the PPV feeder is tensioned by the screws of the rear roll. The driving roll is driven by an electric motor and a gearbox, which is attached to the frame. The conveying belt is supported by side rollers, central rollers and bottom rollers. The wiper cleans the belt feeder from the dirt.

The feeder with the a linear belt movement.

PPV Belt feeders = many advantages:

  • Minimum operation costs, which results from the balanced machine design, utilization of many years' of belt feeder operation experience and unification of parts.
  • High quality = high effectivity + highly economic operation.

Parameters of PPV Feeders

The parameters must be dealt with individually depending on the relevant conditions.